Disain Smart Electricity Penghematan pada Peralatan Listrik Menggunakan Sensor Ultrasonic
DOI:
https://doi.org/10.53695/jm.v2i2.576Keywords:
Smart Electricity, ultrasonic sensor, RFID, arduino unoAbstract
Waste of electricity is a problem that often occurs accidentally, especially in household electricity, especially on electrical equipment that is routinely used but forgets to turn it off if there are no users around electrical equipment such as fans, air conditioners, TVs and others. Saving electrical energy is an action to reduce the amount of electrical energy use. This study aims to create a control device for saving electricity consumption. Saving electricity consumption does not mean not using electrical energy for something that is not useful, however, energy savings can be achieved by using energy efficiently where the same benefits are obtained by using less energy. This study uses a design method or is designed to be smart electricity using sensors. ultrasonic with arduino uno, where this tool controls daily use in case of forgetting so that no energy is wasted (waste of electricity) or more practical in controlling electrical equipment. Based on the results of tool testing and data analysis carried out, it was concluded that the working system of this tool succeeded in controlling the use of electronic equipment by detecting the presence of an object / human with the help of an ultrasonic sensor with a horizontal area range. The Radio Frequency Identification sensor is an additional sensor to help the Ultrasonic sensor improve to detect in a wider range of vertical areas by scanning the card. The total cost of the entire expenditure for 1 month is Rp. 203,365 using a smart electricity design tool as a means of saving and the use of electricity based on ultrasonic sensors using Arduino Uno and Rp. 418,175 without tools results in a difference in savings of Rp. 214.810,-Downloads
References
Arafat. 2017. “Desain Dan Implementasi Sistem Smart Home Berbasis Wi-Fi.” Al Ulum Sains dan Teknologi 2(2): 72–78.
Bhavke, Akshay, and Sadhana Pai. 2017. “Advance Automatic Toll Collection & Vehicle Detection during Collision Using RFID.” 2017 International Conference on Nascent.
Technologies in Engineering, ICNTE 2017 - Proceedings.
Daulay, Nelly Khairani, and M Nur Alamsyah. 2019. “Monitoring Sistem Keamanan Pintu Menggunakan Rfid Dan Fingerprint Berbasis Web Dan Database.” Jusikom : Jurnal Sistem Komputer Musirawas 4(02): 85–92.
FI Pasaribu, I Roza, OA Sutrisno, 2020, Sistem Pengamanan Perlintasan Kereta Api Terhadap Jalur Lalu Lintas Jalan Raya, JESCE (JOURNAL OF ELECTRICAL AND SYSTEM CONTROL ENGINEERING) 4 (1), 43-52.
FI Pasaribu, P Harahap, M Adam, 2020, Design of Energy Storage Circuits for Efficiency of Electric Power Usage in Computer Devices, Budapest International Research in Exact Sciences (BirEx) Journal 2 (3), 368-375.
FI Pasaribu, M Reza, 2021, Rancang Bangun Charging Station Berbasis Arduino Menggunakan Solar Cell 50 WP, RELE (Rekayasa Elektrikal dan Energi): Jurnal Teknik Elektro 3 (2), 46-55.
Ginting, Ardika Natadeli, and Muhammad Amin. 2018. “Keamanan Rumah Menggunakan Sensor Pir Dan Modul Gsm Arduino.” Jurnal Teknovasi 05(1): 46–53.
Hayaty, Mardhiya, and Ade Rufaidah Mutmainah. 2019. “Sistem Kendali Dan Pemantauan Penggunaan Listrik Berbasis IoT Menggunakan Wemos Dan Aplikasi Blynk.” Jurnal Teknologi dan Sistem Komputer 7(4): 161–65.
Isfarizky, Zubaili, and Alfatirta Mufti. 2017. “Rancang Bangun Sistem Kontrol Pemakaian Listrik Secara Multi Channel Berbasis Arduino (Studi Kasus Kantor Lbh Banda Aceh).” Karya Ilmiah Teknik Elektro 2(2): 30–35.
Kurnianto, Danny, Abdul Mujib Hadi, and Eka Wahyudi. 2016. “Perancangan Sistem Kendali Otomatis Pada Smart Home Menggunakan Modul Arduino Uno.” Jurnal Nasional Teknik Elektro 5(2): 260.
Manurung, Jonson. 2019. “MENGGUNAKAN SENSOR ULTRASONIK BERBASIS.” 4(1):0–4.
Oky, Oky. 2018. “Perancangan Robot Avoider Berbasis Arduino Uno Menggunakan Tiga Sensor Ultrasonik.” EPIC : Journal of Electrical Power, Instrumentation and Control 1(2): 0–11.
Risqiwati, Diah. 2016. “Rancang Bangun Sistem Monitoring Listrik Prabayar Dengan Menggunakan Arduino Uno.” Kinetik 1(2).
Sadi, Sumardi. 2018. “Rancang Bangun Monitoring Ketinggian Air Dan Sistem Kontrol Pada Pintu Air Berbasis Arduino Dan Sms Gateway.” Jurnal Teknik 7(1).
Siswanto, Aditya Adiguna, and Gata Windu. 2018. “Kendali Dan Monitoring Suhu Dan Ketinggian Air Aquarium Dengan Sensor Ds18B20, Hcsr04 Dan Mikrokontroler Arduino Uno R3 BerbasismWeb.” Prosiding SNST ke-9 Tahun 2018: 121–124.
Wabale, Harshada S. 2017. “Electrical & Electronic Systems Automatic Menu Ordering System Using Zigbee and Arm Processor.” 6(2): 2–4.
Waworundeng, Jacquline, Lazarus Doni Irawan, and Calvin Alan Pangalila. 2017. “Implementasi Sensor PIR Sebagai Pendeteksi Gerakan Untuk Sistem Keamanan Rumah Menggunakan Platform IoT.” CogITo Smart Journal 3(2): 152.
Downloads
Published
How to Cite
Issue
Section
License
This is an open-access journal. All works published under Creative Commons license CC-BY-SA which mean that all content is freely available at no charge to the user or his/her Institution. User are allowed to read, download, copy, write, improve, and create derivative creation even for other lawful purposes, this license permits anyone to, as long as they cite and license the derivative creation under similar terms
Jurnal Mesil (Mesin Elektro Sipil) is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
